WIKA IPT-11 - Manual (Page 29)

Menu section Function Reset value
Sensor-TAG Sensor
Display Displayed value 1 bar
Displayed value 2 %
Display unit Volume/l
Scaling 0.00 to 100.0
Decimal point indication 8888.8
Service Current output - characteristics 4 … 20 mA
Current output - failure < 3.6 mA
Current output - min. current 3.8 mA
Current output - max. current 20.5 mA
The values of the following menu items are not reset with "Reset:
Menu section Function Reset value
Basic settings Position correction no reset
Display Lighting no reset
Service SIL no reset
Language no reset
HART mode no reset
Application no reset
Factory setting
Like basic adjustment, in addition, special parameters are reset to
default values.
7)
Pointer
The min. and max. temperature or pressure values are each reset to
the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
7) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • 4 … 20 mA 29
6 Set up with the indicating and adjustment module
37300
-
EN
-100302