WIKA IUT-11 - Manual (Page 26)

Universal IS Pressure Transmitter UniTrans
Product Description
Subject to change due to technical modifications. © Copyright WIKA Alexander Wiegand GmbH & Co. KG / Germany
WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg · (09372) 132 - 710 · Fax - 706 · E-mail: [email protected] · www.wika.de
22
669
39
.0
5 D
/G
B
06
/2
00
6
101
5.3 Installation Examples
The UniTrans is primarily used to monitor the pressure in pipes, technical equipment
and tanks. Depending on the pressure range pressures between 20 mbar up to 4000
bar can be measured. The pressure is measured using absolute (against a vacuum)
or relative (against external or air pressure) measurement depending on the type of
sensor selected.
The UniTrans is also used for hydrostatic pressure measurement within liquid filled
pipes and containers.
Process Pressure Measurement: Process Pressure Measurement:
Used to measure pressure of liquids Used to measure container pressure.
or gases in pipelines.
Process Pressure Measurement: Process Pressure Measurement:
Installed behind feed pumps for Installed in front of and behind the filter.
process control or monitoring of pump Uses the pressure differential for moni-
functions. toring the function or accumulation of dirt
in the filter. Both output signals are pro-
cessed by a PLC or signal converter.