AT&T Generic 1 - Manual (Page 29)

Note: Each telephone number or feature code is
stored as a separate list item.
2 Pick up handset
[dial tone]
3
Dial Abbreviated Dialing Program code
[dial tone]
4 Dial personal list number (1, 2, or 3)
Version Note: If you are using System 75,
Version 1, you may omit Step 4.
5 Dial list item (1, 2, 3...) [dial tone]
6 Dial number you want to program
Version Note: If you are using System 75,
Version 1, you can use up to 16 digits;
for Version 2, you can use up to 24 digits.
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
7 Press [ # ] [confirmation tone]
●
Number is stored
●
Repeat Steps 5 through 7 if you want to program
additional items on the same list; hang up and
begin again at Step 1 if you want to program
items on another personal list
8 Hang up to end programming
Note: Keep your own personal lists in the
Abbreviated Dialing table provided in the back of
this booklet; group, system, and enhanced lists are
available from your system manager.
To place a call using a
1 Dial appropriate Abbreviated Dialing List code:
personal, group, system,
●
List 1
or enhanced list
List 2
[dial tone]
●
List 3
●
2 Dial desired list item (1, 2, 3...)
●
Stored number is automatically dialed
24