RADWAG MAX 60 Moisture Analyzer User Manual
Moisture analyzer, Series
Advertising
User manual no.:
IMMU-11-02-03-14-ENG
MOISTURE
ANALYZER
MAX
SERIES
B A L A N C E S A N D S C A L E S
RADWAG 26 – 600 Radom, Bracka 28, POLAND
Phone: +48 (0-48) 38 48 800, fax. +48 (0-48) 385 00 10
[email protected]
www.radwag.com
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1. TECHNICAL DATA
- 2. GENERAL SAFETY INFORMATION
- 2.1. Definitions of signals and warning signs
- 2.2. Safety information
- 2.3. Intended use
- 2.4. Inappropriate use
- 2.5. Principles of safety use
- 2.6. Warranty
- 2.7. Monitoring metrological parameters of the instrument
- 2.8. Data included in this user manual
- 2.9. Staff competence
- 2.9.1. Protective clothing
- 3. TRANSPORT AND STORAGE
- 4. UNPACKING, ASSEMBLING AND STARTUP
- 5. KEYBOARD
- 6. MOISTURE ANALYZER’S MENU
- 7. USER MENU OPERATION
- 8. USER MENU
- 8.1. Moisture analyzer adjustment
- 8.1.1. Adjustment
- 8.1.2. User adjustment
- 8.1.3. Adjustment test
- 8.1.4. Temperature adjustment
- 8.1.5. Adjustment report printout
- 8.1.6. Drying test
- 8.2. Determining content of a printout for GLP procedures
- 8.2.1. User
- 8.2.2. Project
- 8.2.3. Parameters determining content of the GLP procedures
- 8.3. Date and time settings
- 8.3.1. Setting date format
- 8.3.2. Setting time format
- 8.3.3. Setting time
- 8.3.4. Setting date
- 8.3.5. Setting displaying criteria for date and time
- 8.4. Setting moisture analyzer operating parameters
- 8.4.1. Entering menu group P4 Readout
- 8.4.2. Filter settings
- 8.4.3. Autozero function
- 8.4.4. Previewing temperature value inside the drying chamber
- 8.5. RS 232 Functions
- 8.5.1. RS 232 parameter settings
- 8.6. Printouts
- 8.6.1. Standard printout template
- 8.6.2. Non-standard printout templates
- 8.6.3. Inserting text into strings
- 8.6.4. Printout selection
- 8.6.5. Enabling non-standard printout templates
- 8.6.6. Non-standard printout templates in drying mode
- 8.7. Moisture analyzer parameter settings.
- 8.7.1. Entering menu group P7 Other
- 8.7.2. Parameter settings
- 9. DRYING PROCESS WITH USE OF SHORTENED MENU
- 10. DRYING PROCESS WITH USE OF DRYING PROGRAM LIBRARY
- 10.1. Defining a drying procedure
- 10.2. Entering name of a drying program
- 10.3. Drying mode selection
- 10.4. Drying temperature setting
- 10.5. Auto switch off settings
- 10.6. Setting the type of displayed and printed measurement result
- 10.7. Setting printout interval
- 10.8. Setting size of a sample to be tested
- 10.9. Setting a corrective coefficient
- 10.10. Restore default setting
- 10.11. Printout of software settings
- 10.12. Saving drying mode settings in moisture analyzer’s permanent memory
- 11. TESTING PROCEDURE USING A DRYING PROGRAM FROM THE LIBRARY OF DRYING PROGRAMS
- 12. SAMPLE PREPARATION FOR A DRYING PROCESS
- 13. SELECTION OF DRYING PARAMETERS
- 14. COOPERATION WITH A PRINTER OR A COMPUTER
- 15. LIST OF COMMANDS COMPUTER - BALANCE
- 16. USER GUIDELINES
- 17. MOISTURE ANALYZER MAINTENANCE ACTIVITIES
- 18. MEMORY OF CARRIED OUT MEASUREMENTS
- 19. MEANS OF USING A MOISTURE ANALYZER FOR DRYING IN TEMPERATURE OVER 160(C