RADWAG E2R Weighing Records - Manual (Page 39)

Version No ...
No of database version read from the
scale, on the basis of this number bases
on the scale are synchronized,
Scale serial no Serial number read from the scale
High mass limit - MAX Top limit value read from the scale,
Low mass limit – MIN Bottom limit value read from the scale,
Order ID set by scale ID of current scale read from the scale,
Order ID set by system ID of current order from system
Product ID set by scale ID of product read from scale
Product ID set by system
ID of current product read from system
Operator ID set by scale
ID of current operator read from scale
Operator ID set by system ID of current operator from system
ID of latest report,
weighment …
No of records saved in the system read
from PUE7/HY or 3Y scale. If you assume
that weighments or reports are not
uploaded despite the automatic algorithm
of data uploading from the scale, set up 0
value for the selected base.
CAUTION!
Setting up 0 value for ID of the latest report or weighment will again
upload the same weighments from the scale to the database in the
system.
All changes must be confirmed pressing button.
To exit the box without saving changes, press button.
39