Cirrus Logic CS1601H User Manual

Features, Applications, Overview

Advertising
background image

Copyright

Cirrus Logic, Inc. 2012

(All Rights Reserved)

Cirrus Logic, Inc.

http://www.cirrus.com

CS1601

CS1601H

Digital PFC Controller for Electronic Ballasts

Features

Low PFC System Cost

Best-in-class THD

Digital EMI Noise Shaping Reduces Conducted EMI

Adaptive Switching Frequency Control Minimizes Boost

Inductor Size

High Efficiency Due to Zero-current Switching

Integrated Feedback Compensation Simplifies System

Design

Comprehensive Safety Features

• Undervoltage Lockout (UVLO)
• Output Overvoltage Protection
• Cycle-by-cycle Current Limiting
• Input Voltage Brownout Protection
• Open/Short Loop Protection for IAC & IFB Pins
• Thermal Shutdown

Pin Placement Similar to Traditional Boundary Mode (CRM)

Controllers

Applications

LED Power Supply/Driver

Fluorescent Ballasts

HID Ballasts

Overview

The CS1601 and CS1601H are digital power factor correction
(PFC) controllers designed to deliver the lowest PFC system
cost in electronic ballast applications. The controller operates
in a variable frequency discontinuous conduction mode (VF-
DCM) with zero-current switching optimized to deliver best-in-
class THD and minimize the size and cost of magnetic
components. The CS1601 operates at switching frequencies of
up to 70kHz, and the CS1601H operates at frequencies of up
to 100kHz.

The VF-DCM control algorithm varies both duty cycle and
frequency. This spreads the EMI frequency spectrum, thus
reducing conducted EMI filtering requirements. In addition, the
maximum switching frequency is reached at the peak of the AC
input, which allows the use of a smaller, more cost-effective
boost inductor.

The feedback loop is closed through an integrated
compensation network within the controller, eliminating the
need for additional external components. Protection features
such as overvoltage, overcurrent, open and short-circuit
protection, overtemperature, and brownout protect the system
during abnormal transient conditions.

Ordering Information

See

page 16.

R1

R2

R3

R4

R7

R5

R6

8

1

D1

C1

C2

Regulated

DC Output

Q1

AC

Mains

BR 1

BR1

BR 1

BR1

CS1601

CS1601H

GD

ZCD

IFB

GND

CS

IAC

VDD

L

B

6

3

5

7

4

V

DD

STBY

2

V

rect

V

link

FEB’12

DS931F3

Advertising
This manual is related to the following products: