Cirrus Logic CS3318 User Manual

Cs3318, Channel analog volume control, Features

Advertising
background image

Copyright

© Cirrus Logic, Inc. 2006

(All Rights Reserved)

http://www.cirrus.com

8-Channel Analog Volume Control

Features



Complete Analog Volume Control

8 Independently Controllable Channels

3 Configurable Master Volume and Muting
Controls



Wide Adjustable Volume Range

-96 dB to +22 dB in ¼ dB Steps



Low Distortion & Noise

-112 dB THD+N

127 dB Dynamic Range



Noise-Free Level Transitions

Zero-Crossing Detection with
Programmable Time-Out



Low Channel-to-Channel Crosstalk

120 dB Inter-Channel Isolation



Comprehensive Serial Control Port

Supports I²C

®

and SPI

TM

Communication

Independent Control of up to 128 Devices
on a Shared 2-Wire I²C or 3-Wire SPI
Control Bus

Supports Individual and Grouped Control of
all CS3318 Devices on the I²C or SPI
Control Bus



Flexible Power Supply Voltages

±8 V to ±9 V Analog Supply

+3.3 V Digital Supply

Description

The CS3318 is an 8-channel digitally controlled analog
volume control designed specifically for high-end audio
systems. It features a comprehensive I²C/SPI serial
control port for easy device and volume configuration.

The CS3318 includes arrays of well-matched resistors
and complementary low-noise active output stages. A
total adjustable range of 118 dB, in ¼ dB steps, is
spread evenly over 96 dB of attenuation and 22 dB of
gain.

The CS3318 implements configurable zero-crossing
detection to provide glitch-free volume-level changes.

The I²C/SPI control interface provides for easy system
integration of up to 128 CS3318 devices over a single 2-
wire I²C or 3-wire SPI bus, allowing many channels of
volume control with minimal system controller I/O re-
quirements. Devices may be controlled on an individual
and grouped basis, simplifying simultaneous configura-
tion of a group of channels across multiple devices,
while allowing discrete control over all channels on an
individual basis.

The device operates from ±8 V to ±9 V analog supplies
and has an input/output voltage range of ±6.65 V to
±7.65 V. The digital control interface operates at +3.3 V.

The CS3318 is available in a 48-pin LQFP package in
Commercial grade (-10° to 70° C). The CS3318 Cus-
tomer Demonstration board is also available for device
evaluation. Refer to

“Ordering Information” on page 44

for complete details.

±8 V to ±9 V

+3.3 V

8-Channel

Analog

Outputs

I²C/SPI

Serial

Control

8

+

_

Zero Crossing

Detector

I²C / SPI

Control

Port

8-Channel

Analog

Inputs

8

DECEMBER '06

DS693F1

CS3318

Advertising
Table of contents