About memory, Installing the memory – Apple SDRAM DIMM User Manual

Page 2

Advertising
background image

2

- iMac (Slot Loading)

About Memory

The iMac (Slot Loading) computer uses standard PC-100 DIMMs with the

following specifications:

• PC-100 Synchronous DRAM (SDRAM)

• 64-bit wide,168-pin module

• maximum of 16 memory devices on the DIMM

• unbuffered; do not use registered or buffered Synchronous DRAM

(SDRAM)

• maximum height of 50 mm

There are two DIMM slots accessible from the bottom of the computer. Use

a coin, like a quarter, to release the access panel and install the DIMM or

DIMMs.

Installing the Memory

1

Turn your computer off by choosing Shut Down from the Special menu.

2

Unplug all cables, except the power cord, from your computer.

±

WARNING:

If your internal modem is connected to a telephone line,

disconnect the telephone line from the internal modem port before you

open the access door. This prevents electric shock.

3

Turn the computer so the screen is facing down.

Advertising