Duff-Norton SK-9800-100 User Manual
Duff-Norton Hardware
Advertising
Publication Part No.
SK9800-100
CAUTION
This manual contains important information for the correct installation, operation and maintenance of the
equipment described herein. All persons involved in such installation, operation, and maintenance should be
thoroughly familiar with the contents. To safeguard against the possibility of personal injury or property
damage, follow the recommendations and instructions of this manual and keep it for further reference.
WARNING
Improper use can result in personal injury. To avoid injury:
•
Do not use actuators to lift, support, or transport people or
loads over people without written approval from Duff-Norton.
•
Read all product warnings and operating instructions.
Advertising
Table of contents
Document Outline
- Contents
- Section I
- General Introduction
- 1-1. General
- 1-2. Applications
- 1-3. Specifications
- 1-4. Important Precautions
- 1-5. Warranty and Warranty Repair
- Section II
- Installation
- 2-1. Inspection
- 2-2. Clevis Pins
- 2-3. Orientation
- 2-4. Vent plugs
- 2-5. Wiring
- 2-6. Limit Switch Adjustment
- Section III
- Lubrication
- 3-1. Lubrication
- 3-2. Motor Reducer Lubrication
- 3-3. Motor and Reducer Bearings
- 3-4. Clevis Pins
- Section IV
- Maintenance
- 4-1. Disassembly (Refer to Figure 5-1)
- 4-2. Screw & Tube Disassembly
- 4-3. Gear Removal
- 4-4. Screw and Nut Inspection
- Table 1
- 4-5. Lifting Nut Removal
- Table 2
- 4-6. Cleaning
- 4-7. Inspection (Refer to Figure 5-1)
- 4-8. Assembly (Refer to Figure 5-1)
- Section V
- Illustrated Parts List
- 5-1. General
- Figure 5-1. Exploded Illustration for Duff-Norton SuperCylinder Series
- Figure 5-2. Exploded Illustration of Duff-Norton SuperCylinder Parallel Configuation
- Figure 5-3. Exploded Illustration of Duff-Norton SuperCylinder Right Angle Configuration