EasyN H3 Series Central Management System - Manual (Page 18)

MVH3E-E-2.0.1.7 - 17 -
2.8.3 Delete Map
Select map name then click “Delete Map” to cancel map
2.9 Parameters configuration
To connect device for configuration on parameters configuration page (double
click device channel, the image should display on right side image frame).
2.9.1Color
【 Brightness 】 drag slider to select best brightness
【 Saturation 】 drag slider to select best saturation
【 Contrast 】 drag slider to select best contrast
【 Hue 】 drag slider to select best color
【 Default 】 click to load default value
【 Flip 】 tick for image turnover(need device support)
【 Mirror 】 tick for mirror image(need device support)
【 Scene 】 white balance: support auto, indoor, outdoor. Default is auto(need
device support)
【 Infrared 】 night vision: support auto switch, manually switch. Default is auto
(need device support)
Note: it can not configure if device does not support that function.
2.9.2Video
【 Stream Type 】 support main stream and second stream
【 Resolution 】 different resolution for different model