EasyN H7 CMS - Manual (Page 26)

MV-H7E-E-2.3.3.6
24
3.3.8 Alarm Out
【channel】 Allow setup name for choosed channel
【Valid period of time】 Setup alarm output time period. + mean valid period,-
mean except the period
3.3.9 PTZ
【Video Channel】 choose video channel.
【Address】 Matching the PTZ address with protocol.
【Protocol】 Support Palco-D & Palco-P, default is Palco-D.
【Step Length】 Range 1~64, default 32. High speed will make the control hard ,
suggest under 32 for high speed dome.
【Comm Setting】 Set baud rate, data bit, stop bit, parity bit.