FMI ICST-01 - Manual (Page 8)

IN-ICST-01-07 8
Quick Start Screens:
Level 1, called “Pick and Run”, is designed to allow the least experienced user to select a
program from a list of documented programs, load that program into the hardware, and enable
program execution. Some operational parameters may be optionally adjusted at this level.
Level 2 – The “Target Inspector”, is designed for hardware checkout. On this level, an
engineer can see the target hardware the way the SCL controller sees it. Input lines can be
observed dynamically, output lines can be exercised individually and bi-directional signals
can be tested in both directions