Hogtunes REV 200-RM : 2 Channel Class D Amplifier / 2x100 watts (2014 - model year) - Manual (Page 6)

6
adjusting Your sYsteM-Please read!
In order to make your new system perform as good as it was designed,
please take a minute to understand and follow these tips:
• Set your “Automatic Volume Control” (AVC) to 3 bars. After extensive
on-road testing, we found that this AVC position works and sounds
best. Your new amplifier has been specifically set-up for this radio
setting.
• Your Hogtunes system is designed specifically for a motorcycle at
speed. Exhaust noise and wind noise have been taken into careful
consideration in how your system performs. How your new system
sounds in a driveway or garage is radically different from how it will
sound at highway speeds. Although your system was set-up with a
factory radio, with its bass and treble controls in the middle position,
if you feel the need to make adjustments please do so (carefully) at
your normal cruising speed.
technical sPecifications
Hogtunes REV 200-RM Amplifier
Rated Power at 2 Ohms: 100 Watts/Channel (@1% THD)
Efficiency: >70%
Fuse: 15 amp