Hogtunes REV 200-AA : 2 Channel Class D Amplifier / 2x100 watts (1998 - 2013 - model years) - Manual (Page 3)

3
For bikes with
dual REV 200-
AA’s, 2nd amp
will be mounted
on Hogtunes
RG40.4
Adaptor kit
(Drag #4405-0232)
as shown in
Figure 2.3
Figure 2.2 Figure 2.3
Mounting Considerations/
required adaptor Kits
Depending on your model of bike or what you have for an existing system, you
may need a Hogtunes Amplifier Adaptor Kit.
If you have a Standard, EG Classic, Street Glide or Ultra and this is the only
Hogtunes amp in the system, the amp will adhere to the top of the radio using the
supplied “hook and loop” adhesive. No adaptor needed.
If you have a Standard, EG Classic, Street Glide, or Ultra and this will be the 2nd
amp in the system, Hogtunes “2CHSP” (Drag Specialties Part # 4405-0234) is
required. This kit bolts into your fairing and locates the REV 200-AA between the
radio and brake side speaker. Please do not continue the install until you have the
required parts. 2CHSP can also be used if you prefer not having an amplifier sit
on top of the radio.
If you have a Road Glide or Road Glide Ultra, Hogtunes has 2 different RG
Adaptor kits and you will need one of them. If you don’t not have the adaptor
you need, please do not continue the install until you have the required parts.
1) If this is the only amp in the system or if you already have a Hogtunes NCA
450-AA or NCA 40.4 and are adding to the system, you will need Hogtunes
RG Adaptor Kit (Drag Specialties Part # 4405-0096) which bolts the amp to
the main studs that attach the inner fairing to the frame of your bike.
2) If you already have a REV 200-AA in the bike, it should be mounted to a plate
attached to the main studs that hold the inner fairing to the frame of your bike.
The second amp will bolt in using Hogtunes RG 40.4 Adaptor kit
(Drag Specialties Part # 4405-0232). This will locate the second amp off to
the extreme brake side of the inner fairing.
If required, please have the amplifier mounted to the appropriate adaptor (but not
to the bike yet) before continuing with the install. If you do not have the required
adaptor, please consult your retail dealer.
In most cases,
REV 200-AA will
be mounted on
Hogtunes RG
Adaptor kit
(Drag #4405-0096)
as shown in
Figure 2.2