Code hopping technology – Avital 3100L User Manual

Page 17

Advertising
background image

13

©

2008 Directed Electronics

ZONE

(Number of

DEALER-INSTALLED

LED Flashes)

DESCRIPTION

OPTIONS

1

Instant trigger for optional sensor,
hood or trunk pins

2

A heavier impact detected by
the on-board impact sensor

3

Door switch trigger

5

Ignition trigger

NOTE: The LED does not report when the warn-away response has been
activated; it only reports triggered sequences.

Code Hopping

Technology

The receiver and remote use mathematical formulas called algo-

rithms to change their codes each time the remote is used. This

Code Hopping Technology has been developed to increase the

security of the unit. By following this set code sequence, the

receiver and remote stay synchronized, even if the remote is used

out of range of the vehicle. If, however, the remote is pressed many

times out of range, or the battery is removed, the remote may get

temporarily out of sync and fail to operate the system. To resyn-

chronize the remote, simply press

several times within range

of the vehicle. The system will automatically resynchronize and the

remote will respond normally.

Advertising