Airhorn_color_pg1, Hornblasters, Air horn kit installation guide – HornBlasters VX Bandit User Manual

Page 2: Kit contents, Important, Before getting started, Important safety instructions

Advertising
background image

Kit Contents:

• HornBlasters Bandit, Bullet, Caboose, PsychoBlaster

• Viair Air Source Kit (20003, 20005, 20007, 20008)

• Fittings, Air line, Wiring Kit

HornBlasters

Air Horn Kit

Installation Guide

IMPORTANT:

This complete train horn kit uses 12 volt DC components. Only install this kit

with a 12 volt DC power source.

Support Line: +1 (813) 783-8058

Fax Line: +1 (813) 783-2407

[email protected]

www.hornblasters.com

Before Getting Started

Read over the entire instruction guide before you begin your installation.

Important Safety Instructions

CAUTION: To prevent the risk of electrical shock or electrocution:

• Do not disassemble any electrical components of this horn kit (air compressor, air valve, pressure switch).

• Do not attempt repairs or modifications of any component. Please refer to qualified service agencies for all service and

repairs.

• Do not operate any component where it can fall or be submerged into water or any kind of liquid.

• Do not reach for any component that has fallen or been submerged into water or any kind of liquid.

• Use the included components with 12 volt DC systems only.

• Do not leave the air system unattended during use.

WARNING: To prevent injury:

• Never allow children to operate the compressor or air horn. Use close supervision when operating this equipment near

children.

• The air compressor will become very HOT during and immediately after operation. Do not touch any part of the compressor

with your bare hands during or immediately after use.

• Do not use this product near open flames or explosive materials or where aerosol products are being used.

• Do not operate this product where oxygen is being administered.

• Do not pump anything other than atmospheric air.

• Never use this product while sleepy or drowsy.

• Do not use any tools or attachments with the supplied air source unit without first determining maximum air pressure for

that tool or attachment.

• Never point any air nozzle or air sprayer toward another person or any part of your body.

• The included compressor is equipped with an automatic reset thermal protector and can automatically restart after the

thermal protector resets. Always cut off power source when thermal protector becomes activated.

• Use only in well ventilated areas.

• Do not sound the air horn(s) in close proximity to another person’s or your own ear(s).

• Do not fill the included air tank above 150 PSI. Doing so may result in death or serious injury.

1

Advertising
This manual is related to the following products: