Airlink AWLH3025 - Manual (Page 18)

- 14 -
Preferred
SSID Type in the SSID of the target device you want to connect to.
BSS Type You can select the connection type: Peer-to-Peer, Access Point or
Auto Mode.
Tx Rate You can select the data rate or set to auto mode from the pull-down
menu.
Channel Select the channel you want to use.
Power Mode No Power Save：the adapter will be in full active mode.
Max Power Save：the power save mode will be enabled.
4x Config Select to disable or enable the TI-Based 4x function.
Tx Power
Level Select the transmit power level: Low Power, Medium-Low Power,
Medium Power, Medium-High Power, High Power. The power
level function is used to extend the communication distance.
Mode Select from 802.11b, 802.11b+, 802.11g, or B&G Mode (If you
choose this option the wireless network adapter will automatically
select the suitable standard).
Profile
Enter the profile name and click the Save button to save your
configuration, To open the profiles you saved, select the profile
from the pull-down menu and then click the Load button.