KWorld ATSC 120 - Manual (Page 2)

-2-
Chapter 1: PlusTV HD PCI 120 Hardware Installation
1.1 Package Contents
Unpack your PlusTV HD PCI 120 package and make sure that all items are included. The following items
should be included in your package:
z PlusTV HD PCI 120 TV Card
z Quick Start Guide
z Installation CD
z Remote control & remote sensor
z FM Antenna
z Multi-cable for AV/S-Video Input
1.2 System Requirements
z Pentium-IV 2.4GHz or above (3.0GHz above recommended for HDTV programs)
z 256MB RAM of system memory or above (512MB recommended)
z Graphics card (Must support Microsoft DirectX 9.0 or above, high-end Graphics Card with DX-VA
feature recommended for HDTV programs)
z Sound card (AC97 Compatible Sound Card)
z PCI 2.2 Compliant Slot
z 1GB free HD space
z CD-ROM drive (For software installation)
z Outdoor antenna for better ATSC and analog TV reception
z Windows® XP(SP2) / Windows XP MCE 2005 / Windows Vista
1.3 Hardware Installation
Follow the steps shown below for installation of your TV card and use the pictorial guide below for
peripheral connections.
1. Turn off your computer.
2. Select a PCI slot and remove the slot cover, screw, etc.
3. Place PlusTV HD PCI 120 card firmly into the slot and secure the card.
4. Close the computer's case and turn on the power.