3 recording multiple sources and mix them together, 4 open a file, Recording multiple sources and mix them together – KWorld SnapMusic User Manual
Page 5: Open a file
Line In
Audio In
Connect the output of your home stereo to the device. ++
** Please note that some digital signals contain a copyright bit. The recording software will ignore the copyright bit set, you will not
record anything.
++ If your source does not have a set of RCA outputs then you can use an adapter to connect from the headphone jack to the L/R
connector of the device
2.3 Recording multiple sources and mix them together
To record multiple sources at the same time and mix them together is a special feature of SnapMusic. You
can use it to record your podcast with your voice and background music at the same time.
To record two sources together, simply click on two source buttons. For example, if you need to record your
voice and a song from your tape and mix them together, connect your cassette player to the “Audio-in”
connector and plug in your microphone. Click Audio-in and Mic-in buttons and click on record button to
start recording.
2.4 Open a file
Click
button to enter the following pages:
5