KWorld HyperMedia - Manual (Page 4)

4
. Default frequency table in “Frequency table setting”
. Double click on any column to add/edit/delete default
. Please select the satellite which you have and enter the
z
ch your satellite dish
z
tom
z E b
Turns on LNB power of satellite
ote: For information of LNB settings, please check with your dish provider to get the correct information.
3
is assigned only for auto-scan option. Otherwise, users
must assigned a frequency scanning range for each
channel. Auto-scan wizard will scan all frequencies
based on the default frequency table.
4
frequency table. The “Frequency table setting” will
guide you through to either add/edit/delete consequent
parameters.
5
relative frequency value for LNB.
Satellite: Select the satellite in whi
is aiming at. (Here we use ASIASAT2 as an example)
LNB Type: There are four LNB types to choose from.
a. Universal
b. Normal
c. Signal Cus
d. Dual Custom
na le LNB Power:
dish.
N