Alpine KCE-300BT - Manual (Page 7)

4
-EN
ALPINE KCE-300BT 68-08564Z70-A (EN)
Bluetooth SETUP
[ The explanations in this Owner’s Manual mainly
describe the following operations from the AV head
unit.
Bluetooth Setup Operation
The following steps 1 to 5 are common to the various
Bluetooth functions. For details, refer to each individual
function.
• When calling, or selecting the Tel. mode or Bluetooth
Audio source, Bluetooth Setup operation cannot be
performed.
• Refer to the Owner’s Manual of the CD Head unit, AV
Head Unit or Digital Media Receiver, and set “Bluetooth
IN” or “Bluetooth” to ADAPTER, and then perform
Bluetooth SETUP operation.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE] or [ ] of SOURCE.
The SOURCE SETUP screen is displayed.
3
Touch [ ] of BLUETOOTH or BLUETOOTH
SETUP.
The Bluetooth setup is displayed.
4
Touch [;] / [:] , [ON] / [OFF] or [ ] of the
desired item to change its setting.
Setting items:
PAIRED DEVICES / DEVICE SEARCH / CLEAR
DEVICE / VISIBLE MODE / AUTO ANSWER
5
Touch [RETURN] to return to the previous
screen.
Controlling from a CD Head Unit / Digital Media
Receiver:
1 Press and hold SETUP for at least 2 seconds.
2 Turn the Rotary encoder or the Center jog dial to select
Bluetooth or Bluetooth IN, and press ENT.
3 Turn the Rotary encoder or the Center jog dial to select
the desired setting items and press ENT .
Setting items:
Bluetooth IN
↔ Paired Device * ↔ Visible Mode * ↔
AUTO Answer *
↔ Clear Device
*
* When “Bluetooth IN” or “Bluetooth” is set to
ADAPTER, the above items are displayed.
4 Turn the Rotary encoder or the Center jog dial to change
the settings.
5 Press ENT. (Depending on the connected units, this
operation may not be necessary.)
6 Press and hold ESC (or SETUP ) or BACK for at least 2
seconds.
The SETUP mode is canceled.
Setting the Bluetooth Device
Select one of 5 connected Bluetooth compatible devices that
you previously registered (one registered by guest mode*).
Setting item: PAIRED DEVICES
1
Select a Bluetooth compatible device to use
(change connection) from the PAIRED
DEVICE list.
2
Touch [:].
• If the connection is successfully changed, “CONNECTED/
(Device name)” is displayed for 2 seconds, and then the
display returns to the SETUP screen.
• If you input the wrong passcode or communications fail,
“FAILED” is displayed.
• If you want to connect another Bluetooth compatible
device, after disconnecting the current Bluetooth compat-
ible device, connect the Bluetooth compatible device you
want to change to.
The PIN code is fixed as “0000.”
* Guest mode:
Use this mode for a temporary pairing. Registration (in
guest mode) is canceled once the ignition key goes from
ACC to off.
Controlling from a CD Head Unit / Digital Media
Receiver:
1 Turn the Rotary encoder or the Center jog dial to select
a Bluetooth compatible device you want to use (you
want to change connection).
2 Press ENT . (Depending on the connected units, this
operation may not be necessary.)