MSI Z87 MPOWER SP - Manual (Page 37)

Chapter 1
1-23 Getting Started
After all of the hardware and software has been properly installed, reboot the
system. After entering the operating system (OS), right click on the desktop and
choose the “NVIDIA Control Panel”.
4.
Enter the NVIDIA Control Panel. Choose the “Maximize 3D Performance” setting
to enable SLI mode. The configuration screen is shown below. Depending on your
operating system, the screen may look different.
5.
Important
Please ensure that all graphics cards used in SLI mode are of the same brand and
specifications. For best compatibility with the motherboard, MSI graphics cards are
recommended.
Make sure to connect an adequate power supply to the power connectors on the
graphics cards to ensure stable operation.
If you wish to remove one graphics card and quit the SLI function, make sure the
“Maximize 3D Performance” function is disabled before removing the graphics card.
•
•
•
Choose this item