Chapter 2 – MSI Z77A-G45 GAMING User Manual

Page 61

Advertising
background image

2-15

MS-7752

Chapter 2

tRP

Controls number of cycles for RAS (row address strobe) to be allowed to pre-charge.

If nsufficent tme s allowed for RAS to accumulate before DRAM refresh, the DRAM

may fal to retan data. Ths tem apples only when synchronous DRAM s nstalled

n the system.

tRAS

Determnes the tme RAS (row address strobe) takes to read from and wrte to mem-

ory cell.

tRFC

Ths settng determnes the tme RFC takes to read from and wrte to a memory

cell.

tWR

Determnes mnmum tme nterval between end of wrte data burst and the start of a

pre-charge command. Allows sense amplfiers to restore data to cell.

tWTR

Determnes mnmum tme nterval between the end of wrte data burst and the start

of a column-read command; allows I/O gatng to overdrve sense amplfies before

read command starts.

tRRD

Specfies the actve-to-actve delay of dfferent banks.

tRTP

Tme nterval between a read and a precharge command.

tFAW

Ths tem s used to set the tFAW (four actvate wndow delay) tmng.

tWCL

Ths tem s used to set the tWCL (Wrte CAS Latency) tmng.

tCKE

Ths tem s used to set the Pulse Wdth for DRAM module.

tRTL

Ths tem s used to set Round Trp Latency settngs.

Advanced Channel 1/ 2 Tmng Configuraton

Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng

for each channel.

GT OverClockng

Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs.

GT Rato

Ths settng controls the rato of ntegrated graphcs frequency to enable the ntegrated

graphcs to run at dfferent frequency combnatons.

Adjusted GT Frequency

It shows the GPU frequency. Read-only.

Advertising