Getting started – MSI RD480 Neo2 User Manual
Page 117
6-2
MS-7194 ATX Mainboard
Getting Started
Before using the SATA drive, read the following instructions carefully:
RAID Configuration
w
For best performance, use two identical drives for RAID 0.
w
There is no guarantee that it will work for transferring existing RAID 0/ JBOD
drives from other adapter to ULi M1573. It is recommended to use new drives to
create RAID 0/JBOD with M1573.
w
There is no guarantee that it will work for transferring existing RAID 1 drives from
other adapter to ULi M1573. If existing drive with valid data is to be used, backup
all content of this drive before creating RAID 1 and do
‘Create RAID 1 Mirroring for
Reliability
’ at BIOS setup with other new drive. It is recommended to use new
drive to create RAID 1 with M1573.
w
There is no guarantee that it will work for transferring existing RAID 0+1 drives
from other adapter to ULi M1573. If existing drive with valid data is to be used,
backup all content of this drive before creating RAID 0+1 and do
‘Create RAID 0+1
for Striping, Mirroring
’ at BIOS setup with other new drives. It is recommended to
use new drives to create RAID 0+1 with M1573.
w You cannot configure a RAID 0 mode or JBOD mode with more than two hard disk
drives by the chipset limitation.