Chapter 3 – MSI PH67S-C43 (B3) User Manual
Page 50
3-10
BIOS Setup
MS-7673
Chapter 3
BIOS Setup
MS-7673
Chapter 3
Remember to dsable Spread Spectrum f you are overclockng because even a slght
jtter can ntroduce a temporary boost n clock speed whch may just cause your over-
clocked processor to lock up.
VDroop Control
Ths tem s used to select the VDroop control mode.
CPU Vcore/ DRAM Voltage/ PCH 1.05
These tems are used to adjust the voltage of CPU, Memory and chpset.
Current CPU Voltage/ Current DRAM Voltage
These tems show current CPU/ DRAM voltage. Read-only.
Overclockng Profile
Press <Enter> to enter the sub-menu.
Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored profile.
OC Retry Count
When overclockng has faled, settng ths tem as [1, 3] wll allow system to reboot
1/ 3 tmes wth the same overclocked configuraton. If overclockng has faled every
tme, the system wll restore the defaults.
CPU Specficatons
Press <Enter> to enter the sub-menu. The submenu shows the nformaton of nstalled
CPU.
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the nstalled CPU tech-
nologes. Read only.
MEMORY-Z
Press <Enter> to enter the sub-menu.
•
▶
▶
▶
▶
▶
▶
▶
▶
▶