MSI 785GTM-E45 - Manual (Page 44)

3-8
BIOS Setup ▍ MS-7549 BIOS Setup ▍ MS-7549
a
dvanced
bioS f
eatureS
BIOS Flash Protecton
When you enable ths tem and someone attempt to wrte data nto ths area, BIOS wll
show a warnng message on screen and t wll alarm beep.
Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen. Set-
tngs are:
[Enabled] Shows a stll mage (logo) on the full screen at boot.
[Dsabled] Shows the POST messages at boot.
Quck Bootng
Settng the tem to [Enabled] allows the system to boot wthn 10 seconds snce t wll
skp some check tems.
Boot Up Num Lock LED
Ths settng s to set the Num Lock status when the system s powered on. Settng to
[On] wll turn on the Num Lock key when the system s powered on. Settng to [Off] wll
allow users to use the arrow keys on the numerc keypad.
IOAPIC Functon
Ths field s used to enable or dsable the APIC (Advanced Programmable Interrupt
Controller). Due to complance wth PC2001 desgn gude, the system s able to run n
APIC mode. Enablng APIC mode wll expand avalable IRQ resources for the system.
MPS Table Verson
Ths field allows you to select whch MPS (Mult-Processor Specficaton) verson to be
▶
▶
▶
▶
▶
▶