MSI Z97 GAMING 7 AC Manual - Manual (Page 37)

Chapter 1
1-23 Getting Started
JUSB1~2: USB 2.0 Expansion Connectors
This connector is designed for connecting high-speed USB peripherals such as USB
HDDs, digital cameras, MP3 players, printers, modems, and many others.
10.N
C
8.Gro
und
6.US
B1+
4.US
B1-
2.VC
C
1.VC
C
3.US
B0-
5.US
B0+
7.Gro
und
9.No
Pin
The JUSB1 (red mark) connector supports MSI’s new Super-Charger technology
which provides quicker USB charging of your smartphone or other USB-powered
devices. To enable this feature, please install the MSI Super-Charger application
on your computer. When the Super-Charger application is turned on, the JUSB1
connector will convert data channels to extra power channels to quickly charge your
connected device. Please note that when the Super-Charger application is turned on,
data transmission and synchronization over the JUSB1 connector will not function. To
enable the JUSB1 connector to function as a normal USB 2.0 connector, please turn
off the Super-Charger application. When the computer is in stand-by or hibernation
mode (S3/ S4/ S5) Super-Charger mode will automatically be enabled.
Video Demonstration
Watch the video to learn how to charge the smartphone with
Super-Charger.
http://youtu.be/FCyvjr5NbOw
Important
Note that the VCC and GND pins must be connected correctly to avoid possible
damage.
Please only connect one device per USB port to ensure stable charging.
Super-Charger Technology is only available on select MSI motherboard models.
Please refer to the MSI website to check if your motherboard has Super-Charger
technology.
For iPad, JUSB1 (red mark) can still charge iPad in S3, S4, S5 state.
We recommend that don’t disconnect the device when you charge it in S1 state.
•
•
•
•
•