MSI MS-91F7 2010 - Manual (Page 17)

Hardware Setup
▍
MS-91F7
2-5
Hardware Setup
▍
MS-91F7
Important
Mainboard photos shown in this section
are for demonstration of the CPU in-
stallation only. The appearance of your
mainboard may vary depending on the
model you purchased.
Visually inspect if the CPU is seated
well into the socket. If not, take out
the CPU with pure vertical motion
and reinstall.
5. Cover the load plate onto the pack-
age.
6.
Press down the load lever lightly onto
the load plate, and then secure the
lever with the hook under the reten-
tion tab.
7.
Important
Whenever the CPU is not installed, always protect your CPU socket pins with the
plastic cap covered (shown in Figure 1) to avoid damage.
Please refer to the documentation in the CPU fan package for more details about the
CPU fan installation.
Confirm if your CPU cooler is firmly installed before turning on your system.
•
•
•