Fan power connector: cpufan1, sysfan1, Spi flash rom connector: jspi1, Important – MSI IA-Q45 User Manual
Page 26
2-14
Hardware Setup
▍
Fan Power Connector: CPUFAN1, SYSFAN1
The fan power connector supports system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the
positive and should be connected to the +12V; the black wire is Ground and
should be connected to GND. If the mainboard has a System Hardware
Monitor chipset onboard, you must use a specially designed fan with speed
sensor to take advantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor’s official web-
site or consult the vendors for proper CPU cooling fan.
Fan cooler set with 3- or 4-pin power connector are both available for
CPUFAN1.
•
•
SPI Flash ROM Connector: JSPI1
This connector is used to flash SPI flash ROM.
1
2
9
10
PIN
SIGNAL
PIN
SIGNAL
1
3
5
7
9
VCC3_SB
SPI_MISO_F
SPI_CS0_F#
GND
SPI_HOLD#
2
4
6
8
10
VCC3_SB
SPI_MOSI_F
SPI_CLK_F
GND
NC
SENSOR
+12V
GND
CONTROL
CPUFAN1
SENSOR
+12V
GND
CONTROL
SYSFAN1