Chassis intrusion connector: jci1, Serial ata connector: sata1 ~ sata4 – MSI IB-945GC User Manual
Page 24
Advertising
2-12
Hardware Setup
▍
Chassis Intrusion Connector: JCI1
This connector is provided to connect the chassis intrusion switch cable. If
the chassis is opened, the chassis intrusion mechanism will be activated.
The system will record this status and show a warning message on the
screen. To clear the warning, you must enter the BIOS utility and clear the
record.
1.CIN
TRU
2.Gro
und
Serial ATA Connector: SATA1 ~ SATA4
This connector is a high-speed Serial ATA interface port. Each connector
can connect to one Serial ATA device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
Advertising