MSI MS-9A08 User Manual
Page 60
4-12
BIOS SETUP
▍
APM Configuration
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
Leaves the computer in the power off state.
[Power On]
Leaves the computer in the power on state.
[Last State]
Restores the system to the previous status before
power failure or interrupt occurred.
Resume On Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incom-
ing call on the modem) awakens the system from a soft off state.
Resume On LAN
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard LAN is detected.
Resume On RTC Alarm
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
▶
▶
▶
▶
▶