MyWeigh AXE300 - Manual

AXE Owner's Manual & Troubleshooting
Low Batteries & bad battery connections are the #1 cause of scale malfunction and inaccuracy! We
test all of our scale returns from consumers. Fully 60% of consumer returns are battery related
problems. This sounds silly but it's true! A scale will perform slowly, or read inaccurately when it has low
batteries. Please replace the batteries often (and only use good quality batteries). We include good
quality batteries with all of our scales but batteries can run low in storage. If your scale simply won't
turn on while on Battery power, this is often caused by loose battery connections. Battery prongs
(terminals) are made of metal. They must be making good contact with your batteries in order for the
scale to power on. You can use a paperclip to slightly bend the battery prongs to make them have a
better connection. Also some poorly designed batteries have recessed or partially obstructed battery
terminals. This may cause your prongs to be touching the plastic housing of the battery instead of the
metal battery terminal.
TROUBLESHOOTING NOTES:
1) If the Display ever becomes locked showing "Out2", please recalibrate the scale as outlined below
2) If the Display ever becomes locked on LLLL or EEEE, this indicates that the scale was shocked, dropped
or otherwise damaged and the delicate weighing sensors have been damaged. You can try recalibrating
the scale (If the sensor has not been hurt too badly it will work again after recalibration). Otherwise you
will have to follow the warranty instructions that came with your scale.
Although the AXE is designed to be the most durable pocket scale in the market, It’s important that you
never overload or drop/shock the scale. This scale is still a delicate instrument and must be treated with
care and caution. Scales are delicate instruments and unlike Cellular phones, scales have delicate
sensors that determine how much an item weighs. If you drop or shock your scale, these sensors "feel"
the shock and are sometimes destroyed. This happens with all digital scales. We design our scales to be
as resistant to shock or drops as possible, however there is no way for us to protect 100% against load
cell or sensor damage. A well-treated scale will provide years of reliable and accurate weighing.
However an abused scale will only work until it is damaged.
PLEASE READ COMPLETE INSTRUCTIONS BEFORE USE
Thank you for purchasing The AXE. With normal care and proper treatment it will provide years of
reliable service. Please read all operating instructions carefully.
.KEEP THE FOLLOWING POINTS IN MIND:
* If the display becomes locked on Out2 please recalibrate the scale.
* Avoid lengthy exposure to extreme heat or cold, your scale works best when operated at normal room
temperature. Always allow the unit to acclimate to a normal room temperature for at least one hour
before use.