Controls – Audiovox GMRS9010-2CH User Manual

Page 10

Advertising
background image

128-7033

10 of 28

Controls:

LED Flashlight Button (16)
Press this button on the right side of the Transceiver to light the white LED
(15) on top of the unit, thereby activating the built-in flashlight function.
Power On/Off/Keylock (13) Button

Press and hold the power on/off button (

) for at least 2 seconds. You

will hear a confirming melody to indicate the unit is on. To turn the unit
off, press and hold the button for at least 2 seconds. When the unit is on
and the button is pressed for less than 2 seconds, the keylock icon
(

) will appear to disable the MODE, SCAN and channel up/down

buttons.
Adjusting the Volume (10, 11)
With the unit powered on, press the Up Channel/Volume button ( ) to
increase volume and the Down Channel/Volume button ( ) to decrease

10

GMRS9010-2CH OPERATIONAL MODES

WEATHER BAND

WEATHER BAND
SELECT

CHANNEL
SELECT

ROGER
BEEP

BUTTON
BEEP

DUAL
WATCH

VOX LEVEL
SELECT

CALL
SELECT

POWER
SELECT

(GMRS Channels
Only)

GMRS/FRS BAND

CTCSS
SELECT

CHANNEL
SELECT

NOTE: 1. To switch between GMRS/FRS

and Weather Band modes,
press and hold the Mode but-
ton for 3 seconds. Refer to the
appropriate section of this
manual for detailed operating
instructions for each mode.

2. To enter the VOX mode, press

and hold the SCAN button for 3
seconds.

Advertising