Prevue Pet 620 - Manual

Step #1
First, take one of the end panels (Picture A) with the bottom latch facing to the outside,
and attach both of the top support bars (Picture B). Make sure the bottom four holes are
facing downward and the top two holes face upward. Use the bolts and washers provided,
and at this point only tighten half way with the wrench. Do not attach the other end panel
yet this will occur during Step #4.
A
B
Step #2
Next, attach both of the bottom support bars (Picture C) using the bolts and washers
provided. Make sure the four holes are facing upward and the grooved channel strips are
facing inward. See (Picture D) for completion of Step #2.
C
D
Step #3
Place side mesh (Picture E) with door opening to the outside. Place mesh into holes
located on bottom support bar first & then the top support bar (Picture F). Twist the top
bar toward inside of cage to easily insert mesh into holes. Then twist bar back to normal
position. Repeat this process in the same manner for the side mesh on opposite side.
E
F
Assembly Instructions for Prevue Hendryx
 420/520/620 Small Animal Cage Line
Congratulations! You have made a wise decision by purchasing this precision-
engineered small animal home that will provide you years of enjoyment