Revolabs Executive HD Microphone System — Tandberg C60/C90 User Manual
Revolabs Equipment
Revolabs Executive HD Microphone System — Tandberg C60/C90 Setup
This setup guide will guide you through the steps needed to properly connect a
Revolabs Executive HD Microphone System to a Tandberg C60 or C90 video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Executive HD Microphone System and/or the video codec may not
function properly. Please read through these instructions completely before
proceeding. Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Executive HD 4 or 8 channel Microphone System
2. Tandberg C60 or C90 video codec
3. XLR male to mini-Phoenix cables
NOTE: The Tandberg C60 has 4 microphone inputs and the C90 has 8
microphone inputs. Therefore, the 4-channel Executive HD will interface
directly only to the C60 while both the 4 and 8 channel Executive HD
systems will interface directly with the C90.
NOTE:
IMAGES
OF
SET
UP
SCREENS
ARE
DEFAULT
SETTINGS
FROM
T
ANDBERG
AND
ARE
PART
OF
THE
T
ANDBERG
C
ODEC
C90 A
DMINISTRATOR
’
S
G
UIDE
© J
ULY
2009