Revolabs FLX2 VoIP POE Kit User Manual
Revolabs poe injector kit
Advertising
Revolabs PoE Injector Kit
01‐POEADP‐KIT
The Revolabs PoE (Power over Ethernet) Injector kit allows to use the Revolabs FLX VoIP behind Ethernet
outlets that are not PoE enabled. To add the power to the Ethernet connec on, plug the PoE adapter into
your Ethernet wall outlet, or your Ethernet Hub or Ethernet Switch outlet on which you want to use the
Revolabs FLX. Connect the power connector of the PoE Injector with the power supply, and plug the power
supply into a power outlet.
Now plug an Ethernet cable into the outlet on the PoE Injector, and the other side into the Revolabs FLX VoIP
unit. The FLX will now power up.
Advertising