Revolabs HD Single & Dual Channel System — LifeSize Team 200 User Manual
Revolabs Equipment
Revolabs HD Single / Dual Channel System — LifeSize Team 200 Setup
This setup guide will guide you through the steps needed to properly connect a
Revolabs HD Single or Dual Channel System to a LifeSize Team 200 video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Revolabs Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs HD Single or Dual Channel System
2. LifeSize Team 200 video codec
3. QTY 1 3.5mm unbalanced male to 3.5mm unbalanced male cable*
* 07-35MUTO35MU-01 3.5mm unbalanced male to 3.5mm unbalanced male ca-
ble available from Revolabs