Revolabs HD Single & Dual Channel System — Polycom VSX 8000 - Manual (Page 2)

Connecting the Cables
1. Insert the balanced 3.5mm male connector to the CH 1 OUT port on the Single
or Dual Channel System. If using a Single Channel, DIP Switch #1 should be
“OFF”. If using a Dual Channel, DIP Switch #1 should be “ON”.
2. Insert the green mini Phoenix connector into the red AUDIO INPUT AUX port.
3. Verify that DIP Switch #3 (mic/line) is “OFF”
Configuring the Polycom VSX 8000 Video Codec
1. Select SYSTEM
2. Select ADMIN SETTINGS
3. Select AUDIO
4. Set Red LINE INPUT to AUDIO MIXER
5. ENABLE Echo Canceller
2
2