Revolabs HD Single & Dual Channel System — Polycom VTX 1000 - Manual (Page 2)

Connecting the Cables
1. Insert the unbalanced 3.5mm male connector to the CH 1 OUT port on the
Single or Dual Channel System. If using a Single Channel, DIP Switch #1
should be “OFF”. If using a Dual Channel, DIP Switch #1 should be “ON”.
2. Insert the RCA male connector into the AUX IN
3. Verify that DIP Switch #3 (mic/line) is “OFF”
Configuring the Polycom VTX 1000 Speakerphone
1. Press MENU button
2. Scroll down to ADMIN SETUP then press SELECT
3. Scroll down to AUDIO SETUP then press SELECT
4. Scroll down to AUX INPUT then press SELECT
5. Use Soft Keys Right to select WIRELESS MIC then press SAVE
2
2