Revolabs HD Single & Dual Channel System — Sony PCS-G50 - Manual (Page 2)

Connecting the Cables
2
1. Insert the unbalanced 3.5mm male connector to the CH 1 OUT port on the
Revolabs Single or Dual Channel System. If using a Single Channel, DIP Switch
#1 should be “OFF”. If using a Dual Channel, DIP Switch #1 should be “ON”.
2. Insert the other 3.5mm male connector into the “MIC 1” port on the Sony PCS-
G50.
3. Verify that DIP Switch #3 (mic/line) is “ON”
Configuring the Sony PCS-G50 Video Codec
1. Push the TOOLS button on the remote control
2. Select SETUP
3. Select AUDIO to MIC
4. Select CTE to OFF
5. Select ECHO CANCELLER to ON
6. Save settings
2