Revolabs HD Single & Dual Channel System — Sony PCS-HG90 User Manual
Revolabs Equipment
Revolabs HD Single / Dual Channel Microphone System — Sony PCS-HG90
This setup guide will guide you through the steps needed to properly connect a
Revolabs HD Single or Dual Channel System to a Sony PCS-HG90 video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Revolabs Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs HD Single or Dual Channel System
2. Sony PCS-HG90 video codec
3. QTY 1 3.5mm balanced male to XLR male cable*
* 07-35MBTOXLR-01 3.5mm balanced male to XLR male cable available from
Revolabs