Revolabs Fusion Microphone System - Polycom VSX7000e - Manual

Revolabs Fusion™ Microphone System- Polycom VSX7000e Setup Guide
N OTES AND C AUTIONS :
This setup guide will guide you through the steps needed to properly connect a
Revolabs Fusion System to a Polycom VSX7000e video codec.
1. Connecting the Cables
2. Configuring the VSX7000e Video Codec
Note: It is important to carefully follow these instructions in order and completely.
Otherwise your Fusion System and/or the video codec may not function properly.
Please read through these instructions completely before proceeding. Contact Revolabs
technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Fusion 4 or 8 channel microphone system
2. Polycom VSX7000e video codec
3. Qty 2 RCA-RCA male cable
4. Amplified speakers