Revolabs Fusion Microphone System - Polycom HDX 9001/9002 - Manual

Revolabs Fusion Microphone System - Polycom HDX 9001/9002 Setup Guide
N OTES AND C AUTIONS :
This setup guide will guide you through the steps needed to properly connect a
Revolabs Fusion Microphone System to a Polycom HDX 9001/9002 video codec.
1. Connecting the Cables
2. Configuring the HDX 9001/9002 Video Codec
Note: It is important to carefully follow these instructions in order and completely.
Otherwise your Fusion Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Fusion 4 or 8 Channel Microphone System
2. Polycom HDX 9001/9002 video codec
3. QTY 2 RCA-RCA male cable with QTY 2 Polycom Audio Adapter Cable (P/N
2457-23492-001) or equivalent*
**OR**
4. QTY 2 Revolabs 07-POLHDX-01 Audio Cables*
5. Amplified speakers
*P OLYCOM HDX 9000 SERIES VIDEO CODECS HAVE PHOENIX CONNECTORS FOR AUDIO INPUT / OUTPUT WHILE R EVOLABS
F USION PRODUCTS USE RCA CONNECTORS FOR AUDIO INPUT / OUTPUT . T HE P OLYCOM AUDIO ADAPTER CABLE (P/N 2457-
23492-001)
CONVERTS TWO PHOENIX CONNECTORS INTO FEMA LE
RCA
CONNECTORS
. O
THERWISE
,
A TECHNICIAN COULD
SIMPLY CUT OFF THE ENDS OF TWO
RCA
CABLES AND CONNECT PER THIS DIAGRAM
(R
EFERENCED FROM THE
P
OLYCOM
I NTEGRATOR ’ S R EFERENCE MANUAL FOR THE VSX S ERIES V ERSION 8.7, A UGUST 2007):