Revolabs Fusion Microphone System - Tandberg 6000 / 8000 MXP - Manual

Revolabs Fusion™ Wireless Microphone System- Tandberg 6000 / 8000 MXP
Setup Guide
N OTES AND C AUTIONS :
This setup guide will guide you through the steps needed to properly connect a Revolabs
Fusion System to a Tandberg 6000 / 8000 MXP video codec.
1. Connecting the Cables
2. Configuring the 6000 / 8000 MXP Video Codec
Note: It is important to carefully follow these instructions in order and completely.
Otherwise your Fusion System and/or the video codec may not function properly. Please
read through these instructions completely before proceeding. Contact Revolabs technical
support if you have any questions.
Requirements for connecting systems:
1. Revolabs Fusion 4 or 8 microphone system
2. Tandberg 6000 / 8000 MXP video codec
3. QTY 1 XLR male to XLR male cable
4. Qty 2 RCA-RCA male cable
5. Amplified speakers
NOTE:
IMAGES OF SET UP SCREENS ARE DEFAULT SETTINGS FROM
T
ANDBERG AND ARE PART OF THE
T
ANDBERG
MXP A
DMINISTRATOR
’
S
G
UIDE
© M
AY
2008