Revolabs Single Channel System — LifeSize Room 200 User Manual
Revolabs Equipment
Revolabs Single Channel System — LifeSize Room 200 Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a LifeSize Room 200 video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Single Channel System
2. LifeSize Room 200 video codec
3. QTY 1 2.5mm to RCA adapter cable (provided with Single Channel System)
4. QTY 1 3.5mm stereo male to RCA female adapter* (Radio Shack 274-378)
*
Optional
Item