Revolabs Single Channel System - Polycom HDX 8000 User Manual
Revolabs Equipment
Revolabs Single Channel System - Polycom HDX 8000 Setup Guide
N
OTES AND
C
AUTIONS
:
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a Polycom HDX 8000 video codec.
1. Connecting the Cables
2. Configuring the HDX 8000 Video Codec
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Single Channel System
2. Revolabs 2.5mm to RCA Audio Cable (included with Single Channel)
3. Polycom HDX 8000 video codec