Revolabs Single Channel System - Polycom VSX7000e - Manual

Revolabs Single Channel System - Polycom VSX7000e Setup Guide
N OTES AND C AUTIONS :
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a Polycom VSX7000e video codec.
1. Connecting the Cables
2. Configuring the VSX7000e Video Codec
Note: It is important to carefully follow these instructions in order and completely.
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Single-Channel System
2. Revolabs 2.5mm to RCA Audio Cable (included with Single -Channel)
3. Polycom VSX7000e video codec