Revolabs Single Channel Wireless Microphone System - Tandberg 6000 / 8000 MXP - Manual (Page 3)

Configuring the 6000 / 8000 MXP Video Codec
C
ONFIGURING THE AUDIO MENUS OF THE
6000 / 8000 MXP
VIDEO CODEC
1. Go to AUDIO SETTINGS
2. Select INPUTS
3. Confirm that MIC 1 is ON
4. Adjust the audio Input Type Level if necessary (recommend +8dB)
5. Speak into the Revolabs microphones that are connected to MIC 1.
The audio meter should peak at about 5dB for normal speech.