Axis Communications AXIS 2420 - Manual (Page 17)

AXIS 2420 User’s Manual Focusing Your Camera 17
Verifying the Modem Connection and Completing the Installation
Having initiated your Dial-Up connection, as described above, you can quickly test the
connection by accessing the AXIS 2420 from a standard browser, such as Netscape or
Internet Explorer, as follows:
Focusing Your Camera
If you have installed your camera in a location where you are unable to see the video
images directly in a browser, follow the instructions below to achieve a good basic level of
focus for your AXIS 2420:
For more information about lenses and focusing, please see Lenses and Advanced Focusing,
on page 54.
❷ Click the Installation Wizard to configure the
AXIS 2420 for use with your chosen modem.
❶ Since the AXIS 2420 emulates a DNS server, you
can type in any URL containing a period in the
address field of your browser to display the AXIS
2420 Home Page, as shown here.
abc.xyz
❺ Finally, turn the focus ring slowly towards the
Far-focus (F,
∞
) position - until the Status Indi-
cator displays Green; that is, until a Good level of
focus (>80%) is achieved.
❼ To exit the Focus Assistant: press and hold the Control button until
the Status Indicator flashes Yellow. The Status Indicator displays
Green when the Focus Assistant is closed.
❷ Turn the focus ring to its extreme Far-focus (F, •) position.
❸ To enable the Focus Assis-
tant: using a suitably pointed
object, press and hold the
Control Button until the Sta-
tus Indicator flashes Yellow.
❹ Turn the focus ring to
its extreme Near-focus
(N) position.
❶ Power on the AXIS 2420 and then wait at least 10 seconds.
❻ Return to your browser applica-
tion and review the picture quality.
Repeat step 5 only if you consider
the focal distance as too distant -
until you are satisfied with both the
focal distance and focus quality.
Status Indicator
Control Button