Seiwa SW AP01 User Manual
Page 4
QUICK START
•
Install and check the system as described in Chapter 3.
•
Press the STANDBY key to turn the system on.
•
Follow the on-screen instructions to carry out the initial setup
•
Press the STANDBY and PILOT keys together to turn off.
•
Steer to the desired course and press PILOT.
•
Use the arrow keys to change or trim the course.
•
To steer a course set by a GPS system, press PILOT to select the
pilot menu and press the right arrow to turn NAV on.
•
To activate the DODGE function, press PILOT twice to show the
DODGE mode. Use the arrow keys to dodge.
•
For automatic tacking, press the PILOT key three times to show
the TACK mode. Then press the LEFT or RIGHT arrow key.
function.
•
For wind-vane steering, select WIND from the PILOT menu and
press the right arrow to turn it on.
•
To access the menus, hold the STANDBY or PILOT key for two
beeps. To return to the main display, hold again.
3